Home N|Watch – DIY Wristwatch Kit
Post
Cancel
  1. Mail Notifier - WiFi Edition RouterPi - A Compute Module 4 Router IoT and a Door Entry System Raspberry Pi 4 PCI-Express Bridge “Chip” Smart Power Bank Keep-Alive Remote Mail Notifier (and GPS Tracker) Laptop Bench Power Supply A Tiny Electronic Dice Car Rev Alarm and Gear Indicator N|Watch – DIY Wristwatch Kit DIY Digital Wristwatch USB Power Switch and Filter Bluetooth Net Monitor AVR USB RGB LED Controller CPU Usage LEDs AVR microcontroller based PWM fan controllers
    PROJECTS
  2. AVRDUDESS – A GUI for AVRDUDE AVR-GCC 12.1.0 for Windows 32 and 64 bit
    SOFTWARE
  3. Si4463 Radio Library for AVR and Arduino nRF905 Radio Library for AVR and Arduino MCP2221 HID Library Millisecond tracking library for AVR
    LIBRARIES
  4. Raspberry Pi – Compiling a Module for the 64-bit Kernel A Lithium Battery Charger with Load Sharing Modifying RAM SPD Data Getting Bluetooth modules talking to each other
    HOW-TO
  5. Repairing a Samsung HT-C460 Home Cinema System IC samples LCD Image Viewer First time with Arduino and AVR microcontrollers IR jammer LEDs looking pretty PWM Fan controllers using the 555 timer IC Joule Thief FM Radio Transmitter
    MORE STUFF

N|Watch – DIY Wristwatch Kit

By Zak Kemble
Posted 2014-03-22 1 min read

Orders now closed!

See [this] for more info about the watch.

There probably won’t be a batch #3, but if I do decide to do another batch then subscribe here to be notified about it.

Batch #2 progress: Completed

Discussion

ImageTop side ImageBottom side ImageDouble sided tape on display raiser,
avoid the 2 larger holes at the top
ImageUse 0.8-1mm sewing needles to
help align the raiser		 ImageRaiser in place ImageDouble sided tape on display
ImageDisplay stuck down ImageDouble sided 3mm foam tape
for battery		 ImageBattery stuck down
ImageWatch strap ImageProgramming with the
pogo adapter		 ImagePogo adapter
ImageN|WatchDev ImageN|WatchDev ImageMeasuring current draw (MCU)
Uncategorized